Lonsdor K518ISE is a universal key programmer, supports not only key programming but also odometer adjustment. Built-in for 4th 5th adapter
and Chip & remote detection module, can program Toyota/Lexus smart key all key lost via OBD by working together with extra SKE-LT Smart Key Emulator and K518SE  is the best volvo key programmer, covers wide range of volvo vehicles.

Lonsdor K518ISE Key Programmer Lonsdor K518ISE Key Programmer

Original SKE-LT Smart Key Emulator in four color are not included in tha package need to buy alone

Lonsdor K518ISE Key Programmer emulator

Lonsdor K518SE Highlights:

1. Immobilization Key Programming…..OK

2. Odometer adjustment….OK

3. Built-in Volkswagen 4th & 5th adapter….OK

4. Built-in Chip & remote detection module….OK

5. Free BMW FEM key programming

6.No Need Token for all cars

Lonsdor K518SE Features:

1) 7 inches high brightness, high definition color IPS capacitive screen.

2) Screen shot: press power button and volume down button together

3) Able to detect key frequency and recognize chip

4) 3800mAh polymer batter

5) Support external memory expansion, better within 32G

Tokens: No need Tokens

Communicate via USB cable and WIFI (10m) which ensure software update more convient

Update: online at official site. Update firmware: adapter firmware upgrade & update (connect KPROG adapter with OBD test cable and connect K518ISE with 12V power supply); One key upgrade: click to update to the latest system data.

K518ISE language: English so far

Lonsdor K518ISE key programmer can work with high-end cars :

Volvo (S40, S60, S80, XC60, XC90, C30, C70, V40, V60, V70) key programming.
Toyota/Lexus: smart key all key lost – via OBD ( without dismantle)
BMW CAS3/CAS3+/CAS3++: direct OBD programming
BMW CAS4/CAS4+: dismantle & read data programming
16 -New Maserati: smart key programming
16 -New Ford: smart key programming
Hyundai / Kia 46/47/8A smart key: PIN code reading via OBD, all key lost included.
Renault ( Megane, Koleos, Scenic) without PIN code key programming
VAG group 4th & 5th immobilizer system
Ferrari (458, F12, F149): direct OBD programming
Peugeot /Citroen: two ways to read PIN code & programming, all keys lost included.

Lonsdor K518ISE Key Programmer Car List:

Audi, BMW, Benz, VW, Volvo, Citroen, Ferrari, Maserati, Fiat, Lamborghini, Jaguar, MG,
Land Rover, Bentley, Lancia, Opel, Peugeot, Porsche, DS, Renault, Alfa Romeo, Smart,

Cadillac, Chevrolet, Dodge, GMC, Buick, Hummer, Ford, JEEP, Lincoln, Mercury

Honda, Hyundai, Isuzu, KIA, Lexus, Mazda, Mitsubishi, Nissan, Ssangyong, Subaru, Suzuki,
Toyota, Shigaoka Queen

Iveco, Trumpchi, BYD, Geely, Chery, Great Wall, Young Lotus (Basically all Chinese car
models are included)

Lonsdor K518ISE odometer adjustment car list:

VW, Porsche, Ford, Jaguar, Land Rover, Mazda, Audi, Renault, Hummer, Hyundai, Kia…
Note: more high-end cars will be updated very soon.

Lonsdor K518ISE Key Programmer

How to use Lonsdor K518ISE to program Toyota/Lexus smart key all key lost?

Lonsdor K518ISE can program Toyota/Lexus smart key all key lost via OBD by working together with extra SKE-LT Smart Key Emulator.

Black:  SKE-LT-DST40(94/D4) -Supports 94/D4 smart key.
Red: SKE-LT-8A(88/A8)-Support 88/A8 smart key.
Green: SKE-LT-DST80(98)-Supports 98 smart key.
Blue: SKE-LT-8A(A9)-Supports A9 smart key.


  1. SKE-LT Introduction

Battery standard: CR2032=3V(Please install battery)

  1. Press and hold the power button for 2 sec to turn on/off; In start status, when standby for 2 min, the key will automatically shut down; After switching 3 times, the key will be initialized, and can be recycled again.
  2. Status indicator: Blue-normal; Red-hardware failure;
  3. After receiving the product, please open the back cover of each emulator and install battery first before using it.

Steps to install battery:

  1. Function & Operation

Bind emulator key: first use, it is required to bind SKE-LT emulator to K518ISE main unit;

Backup EEPROM data: backup on board computer immodata;

Make emergency emulator key: with the backup immodata to make the designated SKE emulator key to the key that can replace the original master key. Such key can be used to turn on the ignition, then add smart key can be proceed;

Add smart key: to add a smart key.

Delete smart key: to delete a programmed key.

2.2 Function operation

Operation on all key lost situation:

1)  Binding

  1. Go to the “Bind emulator key” function;
  2. Turn on emulator key and put it into K518ISE key slot (put the status indicator down, make sure the key is active);
  3. Following the system direction and click “OK” to start binding;
  4. After binding completed, the system will indicate “Binding successful”.

2)  Backup EEPROM data

Connect Lonsdor K518ISE with car OBD port, enter into “Backup immodata” to back up the data.

3)  Make emergency emulator key

After choosing the immodata, in a network environment, the system will indicate to choose the corresponding SKE emulator key model, please start the key and put it into K518ISE key slot(make sure the key is activate), follow the instruction to make an emulator key.

4)  Add smart key

Click the car start button, put the generated SKE emulator key close to the start button, with induction the car will automatically activated.

The system will read current key count, then follow the instruction to add key.


1.“Bind emulator key” can identify the SKE emulator key binding state;

  1. SKE emulator key need to bind Lonsdor K518ISE host and can bind only for one time;
  2. When making emulator key, make sure well net connection and to choose the corresponding SKE emulator key model correctly.


if you are intereted in other universal key programmer, check OBDSTAR X300 DP Plus

VXDAS, focus on OBD tool since 2008!

Join groups to get more free resource.

Group: https://www.facebook.com/groups/vxdas/

Website: www.vxdas.com

VXDAS facebook