KT200 Offline Workstation!!!!!The KT200 Full version supports offline work so that your work is no longer limited to places with a network!!!

KT200 Offline Workstation  Purchase Notice

1. KT200 Offline Workstation only supports the KT200 Full Version.

2. If you are KT200 Auto Version, please contact the staff to upgrade to the Full version before buying Offline Workstation. (The upgrade fee is 180 USD)

Online Support Click Here>>

3. The black is the U disk, and the white is the dongle. Black U disk contains

software and installation instructions. It must be installed online before it can work


KT200 Offline Workstation Manual

1. Plug in the device (Figure 1), run the setup, and install the KT200 Software (Figure 2)

Figure 1

Figure 2

2. After installing the KT200 Software, make sure the C drive has a capacity of 15G or more.

3. Make sure you have enough space to run the installation of KT200_ftp.

4. After completing the installation, insert the dongle and run the KT200.exe program to complete the first update activation.

Offline workstation dongle

Click to activate

5. Complete the activation and open the Software.


Related Post

  1. KT200 Support Online 
  2. KT200 VS FoxFlash

VXDAS – Make Auto Repair Easier